Patrol Parts and Pieces

Patrol Parts For Sale by Bearhawk Aircraft

Bearhawk Aircraft has been manufacturing kits and parts for the Bearhawk since 2001. In 2009, we started manufacturing kits & parts for the Patrol. All parts manufactured by Bearhawk Aircraft are made under the supervision and authorization of Bob Barrows, design engineer of the Bearhawk & Patrol.

Bearhawk Aircraft is now offering a fuselage kit for the Patrol. This fuselage package includes:
A welded fuselage with all major attach weldments finish welded in place. These include:

the wing attach points
the landing gear attach points
wing strut attachments
tail surfaces attach points
shock strut attach weldments.

The fuselage will be unpainted, but with the following parts provided as part of the package: vertical stabilizer finish welded in place, landing gear, shock struts, horizontal stabs with elevators, rudder, engine mount, control stick assembly, flap assembly, & rudder pedals.

Remaining for the builder to finish are the little tabs, doors & windows, minor fittings, some sheet metal work, and then sandblasting & painting.

FOR INFORMATION ON PRICE AND AVAILABILITY
CALL 1-877-528-4776 OR EMAIL info@bearhawkaircraft.com
(from Alaska, call 512/626-7886)

PATROL WINGS & WING PARTS

Bearhawk Aircraft is now making Quick Build wings for Bob Barrows two place tandem airplane - the PATROL. In addition, we offer for sale most all the wing parts. These are sold in packages of all the parts required for one Patrol as shown on individual pages of the plans.

All parts are made to order. These parts can be purchased painted, or furnished without primer or paint. Trucks come from our factory every 3 to 4 months. So please give us as much lead time as possible so you are not delayed on your project while waiting for parts.

The parts prices and packing/shipping charges are listed separately. If you use PayPal, the packing/shipping prices will be automatically added. For questions, email us at: parts@bearhawkaircraft.com , or send us a letter to:

Bearhawk Aircraft
P.O. Box 341046
Lakeway, TX 78734

Quick Build wings -these wings are sold in an advanced level of completion. The top skin is completely finish riveted. The forward edge of the bottom skin is finish riveted to the bottom flange of the main spar, and aft of the main spar the bottom skin is drilled and dimpled as are the ribs the bottom skin is riveted to. The bottom skin is pop riveted (with a few pops) for shipment. You drill out the pops to have access for the wing interior work. The spars and all spar parts are alumnipreped, alodined, and primered with MIL-P-23377E strontium chromate epoxy primer. The wing skin interiors and all ribs are primered with Zinc Chromate. The steel parts in the wings are primered with the epoxy primer and top coated with MIL-C-22750D epoxy paint. Quick Build wings come with ailerons and flaps 90% finished, but still requiring fabric covering.

Price $17,305 + $700 crating charge

Plans page #8 parts - includes:
Aileron support frames (2 pieces)
Aileron bellcranks (2 pieces)
Aileron pushrods ( 2 pieces)

Plans page #8 - Parts painted
Price: $370 ($25 S&H)

Plans page #8 - unpainted parts
Price: $330 ($25 S&H)

Plans page #9 parts - includes:
Flap support frames (2 pieces)
Inboard flap levers (2 pieces)
Flap arms (4 pieces)
Flap pushrods (2 pieces w/bushings)

Plans page #9 Price: parts painted $317.50 ($25 S&H)

price unpainted parts $280.00 ($25 S&H)

Plans page #13-#14
- includes page #13 & #14 parts:
Hinge mount flap inboard & outboard
(4 pieces)
Hinge mount Flap center (2 pieces)
Flap inboard & outboard hinges
(4 sets of 2)
Flap center hinges (2 sets of 2)
Aileron hinges inboard (2 sets of 2)
Aileron hinges outboard (2 sets of 2)
Aileron hinge mounts outboard (2 pieces)
Aileron hinge mounts inboard ( 2 pieces)

Plans page # 14 PRICED TOGETHER WITH #13 painted $385 ($20 S&H)

Plans page # 14 PRICED TOGETHER WITH #13 unpainted $355 ($20 S&H)

Plans page #15 parts - includes:
Support tube (2 pieces)
Aileron cable pulley bracket (2 pieces)

Plans page #15 price painted $210 ($20 S&H)

Plans page #15 price unpainted $190 ($20 S&H)

Plans page #16 parts
Wing strut ends milled out of 2024T4
(4 pieces)

Plans page #16 (4 pieces) $135 + $10 S&H

Plans page #15 parts
- includes:
Wing strut attach fittings
(4 pieces)

Wing strut attach fittings (4 pieces) - $90 + $10 S&H

Plans #22 Horizontal Stabilizers & Elevators
:includes 2 Hor Stabs (L&R)
2 Elevators (L&R) w/horns installed
2 trim horns
2 trim linkage parts installed
2 trim pushrods (straight)

Price (unpainted) $797.00 + $50 s+h

#23 - Rudder assy.

Price (Unpainted) $303 + $25 s+h

#24 Horizontal & Vertical Stabilizer Ribs Elevator & Rudder Ribs
11 airfoil shaped ribs
22 flat or tapered ribs

Price (unpainted) $328 + $15 s+h

#26 Landing gear legs without step
1 L & 1 R

Price (unpainted) $575 + $45 s+h

#28 Shock Struts
1 L & 1 R
2 pistons welded to shaft
2 Hard bronze top caps
Includes o-ring & snap ring kit

Price (unpainted) $550 + $30 s+h

#29 Control Stick Assy
1 front stick
1 rear stick
Stick bases (front & rear) welded to 1.25x.035 torque tube
1 interconnect tube
1 idler arm

Price (unpainted) $378 + $22.50 s+h

#30 Rudder Pedals & Brakes
2 front rudder pedals
2 rear rudder pedals
4 cable links for front pedals
4 cable links for rear pedals

Price (unpainted) $195 + $20 s+h

#31 Flap Control Assy
1 Flap handle
1 Inner latch pin release assy
1 mount plate
1 aluminum flap position quadrant
2 .080 tabs

Price (unpainted) $190 + $15 s+h

Windshields

Windshield - Patrol (minor or no trimming required) 1/8" thick

Note: All windshields are drop shipped directly from LPAero Plastics. Shipping and handling are normally $90 - $105

Note 2: For information about the new UVB blocking windshields - download this pdf.

p/n LP-1667CL Clear - $240.00

p/n LP-1667GT green tint - $288.00

p/n LP-1667SG solar gray tint - $288.00

p/n LP-1667UV-GT UV Blocking Green Tint - $374.40

p/n LP-1667UV-SG UV Blocking Solar Gray Tint - $374.40

No picture available

Bearhawk fuel line gascolator made from 6061T6 aluminum, minimum internal port size 5/16 inch diameter. Max operating pressure 150 psi. 2 1/2 inch diameter with 3 inch height. inlet and outlet are 1/4 NTP. 1/8 NPT for quick drain on bottom of bowl. Comes with extra O-ring set. Free shipping if you send BH plans number with order.	Gascolator Assembly $74.50
Fuel cap assemblies Includes all viton O-rings & nylon washers	Fuel cap assemblies $87.50/ pair + $10 S&H
Gerdes short shaft brake master cylinders (new/surplus) with special clevis end (7075T6) so it will fit your Bearhawk with no modifications	Gerdes master cylinders w/special clevis $110.00/pair + $10 S&H
Patrol stainless round tail spring. First heat treated to the proper hardness, and then machined to shape.	Patrol Tail wheel spring Price $90 + $12 shipping.
Bearhawk and Patrol tailwheel assemblies. Complete with wheel, Aero Classic tire and tube. Available in 8" or 10" for either the Patrol (mount for Tapered Rod Spring) or Bearhawk (mount for 1 1/2" Leaf Spring)	Bearhawk tailwheel 8" $550 + S&H 10" $575 + S&H Available at http://bhtailwheels.com
Patrol Wing strut tie down rings	Tie down ring set $16 pair + $4 S&H
Patrol aileron bellcrank bearings - 4 required	Price $6 each + $5.20 S&H
Patrol aileron flap mount bearings - 10 required	Price $7 each + $5.20 S&H

Spar Web and Rib package

All spar webs of .032 2024T3 bent up to match the ribs we have professionally hydroformed. Includes webs for front wing spars , rear wing spars, flap spars, aileron spars, false spars aft of gas tanks, and false ribs(4). This package also includes all the parts that have to be bent on long brakes. These parts are the skin stiffeners aft of rear spar in the flap area, & trailing edge material.

Spar Web and Rib package
Price: $3050 + $175 S&H

Ribs package
- includes all ribs for one Patrol including main ribs (.025 & .032), nose ribs, flap nose & main ribs, aileron nose & main ribs, pocket ribs, & trailing edge ribs. These ribs are professionally hydroformed in the 0 condition and then hardened to the T-351 spec.

Price of all ribs for one Patrol:
$1900 + $45 S&H

No picture available

Patrol spar webs only
Spar webs only along with all aluminum parts that require a 8 ft. or 10 ft. brake

Patrol wing spars:
Price $1150 + $135 S&H

Finished Patrol wing spar/rib package
- finished and ready for assembly.Spars finished with all cap strips riveted in place and all rib attach angles in place & ready for wing assembly. Parts are alumniprepped, alodined, and then primered with MIL-P-23377 strotium chromate epoxy primer. Then the spar parts are riveted together. This package includes aileron & flap spars (bare aluminum), and the false spars. Includes all aluminum parts that need to be bent on an 8 or 10ft. brake.

Patrol wing spars:
Price $7250 + $395 S&H